View STP11NM60FDFP_1318845.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB11NM60FD - STB11NM60FD-1 STP11NM60FD - STP11NM60FDFP
N-channel 600V - 0.40 - 11A - TO-220/TO-220FP/D2PAK/I2PAK FDmeshTM Power MOSFET (with fast diode)
General features
Type STB11NM60FD STB11NM60FD-1 STP11NM60FD STP11NM60FDFP

VDSS 600V 600V 600V 600V
RDS(on) <0.45 <0.45 <0.45 <0.45
ID 11A 11A 11A 11A
3 1
3 12
3 1 2
3 1 2
TO-220
TO-220FP
100% avalanche tested High dv/dt and avalanche capabilities Low input capacitance and gate charge Low gate input resistance Tight process control and high manufacturing yields
DPAK DPAK
IPAK
Internal schematic diagram
Description
The FDmeshTM associates all advantages of reduced on-resistance and fast switching with an intrinsic fast-recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters.
Applications
Switching application
Order codes
Part number STB11NM60FD STB11NM60FD-1 STP11NM60FD STP11NM60FDFP Marking B11NM60FD B11NM60FD P11NM60FD P11NM60FDFP Package DPAK IPAK TO-220 TO-220FP Packaging Tape & reel Tube Tube Tube
July 2006
Rev 9
1/17
www.st.com 17
Contents
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5 6
Test circuit
................................................ 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Value Symbol Parameter TO-220/ DPAK/IPAK VDS VDGR VGS ID ID IDM
(2)
Unit TO-220FP V V V 11
(1)
Drain-source voltage (vgs = 0) Drain-gate voltage (RGS = 20 k) Gate- source voltage Drain current (continuos) at TC = 25C Drain current (continuos) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor 11 7 44 160 0.88
600 600 30
A A A W W/C V/ns
7 (1) 44
(1)
PTOT dv/dt (3) VISO Tstg
35 0.28 20
Peak diode recovery voltage slope Insulation winthstand voltage (dc) Storage temperature --
2500 -65 to 150
V C
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD<11A, di/dt<400A/s, VDD= 80% V(BR)DSS
Table 2.
Thermal resistance
Value
Symbol
Parameter
TO-220 DPAK/IPAK
Unit TO-220FP 3.57 62.5 300 C/W C/W C
Rthj-case Thermal resistance junction-case Max Rthj-a Tl Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose
0.78
Table 3.
Symbol IAR EAS
Avalanche data
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj = 25C, ID = IAR, VDD = 35V) Value 5.5 350 Unit A mJ
3/17
Electrical characteristics
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage Drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS = 0 VDS = Max rating VDS=Max rating, TC=125C VGS = 30V VDS = VGS, ID = 250A VGS = 10V, ID = 5.5A 3 4 0.40 Min. 600 1 100 100 5 0.45 Typ. Max. Unit V A A nA V W
Table 5.
Symbol gfs (1) Ciss Coss Crss Coss eq (2)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Total gate charge Gate-source charge Gate-drain charge VDS = 25V, f = 1 MHz, VGS = 0 Test conditions VDS > ID(on) x RDS(on)max, ID = 5.5A Min. Typ. 5.2 900 350 35 VGS = 0V, VDS = 0V to 400V f=1 MHz Gate DC Bias= 0 test signal level = 20mV open drain VDD = 400V, ID = 11A, VGS = 10V (see Figure 15) 100 Max. Unit S pF pF pF pF
RG Qg Qgs Qgd
3 28 7.8 13 40
nC nC nC
1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 % 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS.
4/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP Table 6.
Symbol td(on) tr tr(Voff) tf tc
Electrical characteristics
Switching times
Parameter Turn-on delay time Rise time Off-voltage rise time Fall time Cross-over time Test conditions VDD = 250V, ID = 5.5A RG = 4.7 VGS = 10V (see Figure 14) VDD = 400V, ID = 11A, RG = 4.7, VGS = 10V (see Figure 16) Min. Typ. 20 16 10 15 24 Max. Unit ns ns ns ns ns
Table 7.
Symbol ISD ISDM (1) VSD
(2)
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 11A, VGS = 0 ISD = 11A, VDD = 50V di/dt = 100A/s, (see Figure 19) ISD = 11A, VDD = 50V di/dt = 100A/s, Tj=150C (see Figure 19) 140 680 A 260 1600 13 Test conditions Min Typ. Max 11 44 1.5 Unit A A V ns nC A ns nC A
trr Qrr IRRM trr Qrr IRRM
1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %
5/17
Electrical characteristics
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Thermal impedance
Figure 3.
Safe operating areafor TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characterisics
Figure 6.
Transfer characteristics
6/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP Figure 7. Transconductance Figure 8.
Electrical characteristics
Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs temperature
Figure 12. Normalized on resistance vs temperature
7/17
Electrical characteristics
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Figure 13. Source-drain diode forward characteristics
8/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Test circuit
3
Test circuit
Figure 15. Gate charge test circuit
Figure 14. Switching times test circuit for resistive load
Figure 16. Test circuit for inductive load Figure 17. Unclamped Inductive load test switching and diode recovery times circuit
Figure 18. Unclamped inductive waveform
Figure 19. Switching time waveform
9/17
Package mechanical data STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com
10/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP Package mechanical data
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
11/17
Package mechanical data STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
12/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP Package mechanical data
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
G
13/17
Package mechanical data STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
TO-262 (I2PAK) MECHANICAL DATA
mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
14/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Packaging mechanical
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
15/17
Revision history
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
6
Revision history
Table 8.
Date 09-Sep-2004 08-May-2006 22-May-2006 26-Jul-2006
Revision history
Revision 6 7 8 9 Preliminary version D2PAK package inserted Updated values Table 5: Dynamic New template, no content change Changes
16/17
STB11NM60FD - STB11NM60FD-1 - STP11NM60FD - STP11NM60FDFP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17

▲Up To Search▲

Price & Availability of STP11NM60FDFP

	To Download STP11NM60FDFP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .